Chiller connection problem

Savager · 08-14-2006, 04:45 PM

Ok, I got all the pvc and barb connectors. I am ready to setup everything and I got little problem today. Ok, I need to connect 3/4 vinyl tube to my current chiller, Pacific Coast 1/10, and I just found out that this chiller has 1/2 or 5/8 connector. What should I do? Is there any adaptor that let you put 3/4 tube? I was looking for barb connection with 5/8 to 3/4 but I couldn't find it.

Thanks.

inkblue · 08-14-2006, 04:49 PM

haVe you tried asking http://www.savko.com/

683 East Lincoln Avenue
Columbus, Ohio 43229

Phone: (614) 885-4445
Toll Free (USA): (877) 885-4445
Fax: (614) 885-4470

PalmTree · 08-15-2006, 01:30 PM

ditto on savko. They have everything!

08-14-2006, 04:45 PM	#1
Savager Senior Member Join Date: Sep 2005 Location: Ridgefield, NJ Posts: 770 Reefer Ratings: (9) Friends: (0)	Chiller connection problem Ok, I got all the pvc and barb connectors. I am ready to setup everything and I got little problem today. Ok, I need to connect 3/4 vinyl tube to my current chiller, Pacific Coast 1/10, and I just found out that this chiller has 1/2 or 5/8 connector. What should I do? Is there any adaptor that let you put 3/4 tube? I was looking for barb connection with 5/8 to 3/4 but I couldn't find it. Thanks.

08-15-2006, 01:30 PM	#3
PalmTree Senior Member Join Date: Dec 2002 Location: Queens, NY Posts: 1,394 Reefer Ratings: (15) Friends: (8)	ditto on savko. They have everything! __________________ Allan

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

08-14-2006, 04:49 PM	#2
inkblue Muro Ami Captain Join Date: Sep 2005 Location: Williamsburgh, Brooklyn Posts: 7,766 Reefer Ratings: (86) Friends: (20)	haVe you tried asking http://www.savko.com/ 683 East Lincoln Avenue Columbus, Ohio 43229 Phone: (614) 885-4445 Toll Free (USA): (877) 885-4445 Fax: (614) 885-4470