Neptune Aqua Jr Help

[littlefish]

Is there anyone that knows how to program a Neptune Aqua JR Controller.
I live in the Bronx (Riverdale) by 251 street and Broadway.
If anyone can help me I'll be very grateful.
I have a Chiller, Heater, UV Unit, Calcium reactor, and all the lights (Metal Halydes, Actinics, and Refugium) I need to program all on this into the controller.
I have the controller, the ph and temperature probes, and the Direct Connect 8.


HELP !!!!!!!!!!!!!!!!!


Alfredo.

 

[littlefish]

Help

I promiss to invite the person that helps me to my next concert. First row seat and I promiss they won't regret it.

Thanks.

Me

 

[regal]

Did you read the manual? It is self explanatory.

 

[cali_reef]

Do you have a serial cable with it?

 

[littlefish]

Controller

It has a serial cable with it.
The manual is a bit confusing thou.
I think I need someone that is familiar with it.

Thanks

 

[cali_reef]

I would help but I can't travel right now.

Two ways you can program the ACjr. first way is thru the three buttons on the unit, the unit comes with basic programs to get you started and you should be able to play around with it after reading the user manual. It is not as hard as the manual makes it out to be and you can reset the unit easily if you think you mess up. Second way is with the serial cable and AquaNotes Lite, you can download it for free from Neptune Systems' website, the program setup is a bit confusing at first and you can email me if you need help. Here are some programing statements you can adjust, copy, paste into the upload section and load into your ACjr:

Timer names:
ACT$-A01
MH1$-A02
MH2$-A03
RFL$-A04
HET%-A05
CHL%-A06
CO2&-A07
FAN#-A08

Program statements:

If Time > 17:30 Then ACT ON
If Time > 03:00 Then ACT OFF
If Time > 19:00 Then MH1 ON
If Time > 01:00 Then MH1 OFF
If Time > 19:10 Then MH2 ON
If Time > 01:10 Then MH2 OFF
If Time > 04:00 Then RFL ON
If Time > 18:00 Then RFL OFF
If Temp > 79.0 Then HET OFF
If Temp < 78.0 Then HET ON
If Temp < 80.5 Then CHL OFF
If Temp > 82.0 Then CHL ON
If Temp > 83.0 Then MH1 OFF
Max Change 025 M Then MH1 OFF
If Temp > 83.0 Then MH2 OFF
Max Change 030 M Then MH2 OFF
If pH > 07.20 Then CO2 ON
If pH < 07.00 Then CO2 OFF
If Temp < 78.5 Then FAN OFF
If Temp > 79.5 Then FAN on
If Power 010 Then MH1 OFF
If Power 015 Then MH2 OFF

 

[crox99]

Alfredo

if it wasn't for tax season I would come and help you with it.