Rating - 85.7%
18   3   0
Tank stand plus bookshelf

Im starting to make my own stand plus more!!
Right now I have a 75gl RR tank that has pretty much been kind missed matched together (strange pumps and diy fixes). I have a great spot to move the fish tank around in my living room the only thing i have to do just START!!!!
the slump i have is kinda scary, its very thin glass and very small only 15gl.

In the pic i have a extra 75gl tank that will be brand new slump that i may customize with acrylic panels kinda like dividers but i dont know how to draw it out dont even know how to start that.

The stand will for now be open but i will place cabinet doors and several PC fans for air intake and outtake. the stand will pretty much be over built du to a large lip in the front to act as a little shelf in the front. On the sides there will be shelves built all the way up to the ceiling and a canopy self all the way on top connecting the two. I may enclose the the gap between the tank and top self.
i will be posting pics diagrams and all sorts everyday but shopping lists

As for now the light i have i will be getting rid of (its a compact florescent and MH light) and i will be getting>>>>>

-Standard Solder less 75g Tank Dimmable Kit (DIY)
-
Neptune Apex Aqua Controller
Honestly Im drooooooooolling just thinking about that :Up_to_sum:

DID I MENTION THE WALL IS SET IN SO THE TANK IS SET IN !!!!!

IMG_0414.jpgIMG_0415.jpg

 
Last edited:

redfishblewfish

Experienced Reefer
Location
Sayreville, NJ
Rating - 0%
0   0   0
It appears the sides of the tank will be right up against the bookshelves. How will you mount powerheads?

One thought is to put a door on one shelf on either side where the inside of the area has the side boards cut open to access the side of the tank.
 
Rating - 85.7%
18   3   0
yea i the drawing i just kinda think about that. i would have eventually run into that problem too. but i think the shelves wont be that close the space in that wall is 114 inches while the tank is 48i got lots of space there and honestly i dont have that many books unfortunately :(
the shelves wont come out to far too and the tank also i need room for cords and to stick my hand in there just in case. i might also leave enuf room to accommodate a 150 gallon but thats still in the air i think that might be to much i dont want to drown my tenets in case something happens
 
Rating - 85.7%
18   3   0
Taking a little longer then I would like to due to my fianc?s sick cat poor thing has a tumor in its paw really strange

But so far I got the skimmer upgrade the other day I couldn't let that pass up. Thanks to NYC REEFER

PLUS!!!!!

some more live rock with some coral that I helped save sold to me by MIAMILUIS


ok so.......
I finally screwed down the sub frame for the tank and let me just say damn was that floor not level at all so yes it looks like Frankenstein but it will be all put together slowly.




Here are some pics of everything


I will need some help one day on iden some of the coral but not now

What I do need is some help on is figuring out what to get to paint and seal the inside of the stand
 

Attachments

  • ImageUploadedByReefs1368744507.865655.jpg
    ImageUploadedByReefs1368744507.865655.jpg
    36.9 KB · Views: 384
  • ImageUploadedByReefs1368744595.215520.jpg
    ImageUploadedByReefs1368744595.215520.jpg
    45.4 KB · Views: 386
  • ImageUploadedByReefs1368744629.132185.jpg
    ImageUploadedByReefs1368744629.132185.jpg
    44.7 KB · Views: 385
  • ImageUploadedByReefs1368744649.067761.jpg
    ImageUploadedByReefs1368744649.067761.jpg
    220.8 KB · Views: 389
  • ImageUploadedByReefs1368744667.134601.jpg
    ImageUploadedByReefs1368744667.134601.jpg
    247.8 KB · Views: 386
  • ImageUploadedByReefs1368744679.884772.jpg
    ImageUploadedByReefs1368744679.884772.jpg
    256.3 KB · Views: 387
  • ImageUploadedByReefs1368744714.434645.jpg
    ImageUploadedByReefs1368744714.434645.jpg
    248.6 KB · Views: 390
  • ImageUploadedByReefs1368744744.201207.jpg
    ImageUploadedByReefs1368744744.201207.jpg
    231.7 KB · Views: 390
  • ImageUploadedByReefs1368744761.268520.jpg
    ImageUploadedByReefs1368744761.268520.jpg
    282.4 KB · Views: 387
  • ImageUploadedByReefs1368744781.451319.jpg
    ImageUploadedByReefs1368744781.451319.jpg
    77.1 KB · Views: 382
  • ImageUploadedByReefs1368744818.818113.jpg
    ImageUploadedByReefs1368744818.818113.jpg
    79.8 KB · Views: 384
  • ImageUploadedByReefs1368744890.317857.jpg
    ImageUploadedByReefs1368744890.317857.jpg
    83.5 KB · Views: 385

CDANN76

Advanced Reefer
Location
Staten Island
Rating - 100%
5   0   0
Lol I have a ton of shims left from the bottom of the stank build so ill use that And put moulding around

I'm sorry I mid read the post. YOU DON'T WANT TO USE THE WOOD SHIMS ON THE TANK IT SELF. it is fine to use thin styrofoam under the tank it self. And ONLY USE wood shims on the stand to make it level. Like you have already done. But most just place the tank on the stand without anything. Sorry again for any confusion.
 

CDANN76

Advanced Reefer
Location
Staten Island
Rating - 100%
5   0   0
Lol I have a ton of shims left from the bottom of the stank build so ill use that And put moulding around

I'm sorry I mis- read the post. YOU DON'T WANT TO USE THE WOOD SHIMS ON THE TANK IT SELF. it is fine to use thin styrofoam under the tank it self. And ONLY USE wood shims on the stand to make it level. Like you have already done. But most just place the tank on the stand without anything. Sorry again for any confusion.
 

Spsnut

Experienced Reefer
Location
Sullivan Co
Rating - 0%
0   0   0
If you are looking at a 1/2" to level your tank after already leveling the stand you might want to rethink your carpentry skill level. Sorry if that seems rude, its mostly tongue in cheek. I hope you are asking if 1/2 styro will be fine. I don't know if I have seen 1/2" 1" or greater is rather standard. I'm on the fence about its use; I would rather see a stand that is flat. Me, I use very thin self made hardwood shims and glue.
 
Rating - 85.7%
18   3   0
Alright it's been a while I know I have been busy as hell dealing with work and my family.
But I do have a truck rented out and tomorrow after work I will be going to Home Depot to pick out some lovely lumber and shinny new screws.

Picks will loaded up after 10 pm tomorrow can't wait to get this starters after so long and wife is def happy about this too !!
 

Sponsor Reefs

We're a FREE website, and we exist because of hobbyists like YOU who help us run this community.

Click here to sponsor $10:


Top