Manhattan Reefs

Manhattan Reefs (http://www.manhattanreefs.com/forum/)
-   Wingo LED (http://www.manhattanreefs.com/forum/wingo-led/)
-   -   Nano n Pico-Tanks n LEDs (http://www.manhattanreefs.com/forum/wingo-led/97230-nano-n-pico-tanks-n-leds.html)

Aqua Pro Builder 04-16-2011 06:53 PM

Nano n Pico-Tanks n LEDs
 
5 Attachment(s)
Update: 02-19-12
Even though most of the items below are still available but we no longer recommend the MR16 for the Edge as they less ideal solution compare to the Edge Savior while the Actinics 2.0 is also upgraded to the Spectral Dash and Revolution Series


Update: 08-22-11


Our MR16 base reef bulbs are now dimmable!
Color mixing and thunder storm effect.

72W 3 channel REMOTE controller with 24W Power Supply $50
72W 3 channel REMOTE controller with 90W Power Supply $80

Bulbs
4x1W $22-$26
3x2W $30-$38

Example:
a set of dimmable LEDs for Edge tank will cost only 2x$22+$60= $104
a set of dimmable LED for Spec tank will cost only $22+$60= $82

a set of dimmable LEDs with 3 colors for Bio Cube 29 will cost only 2x$22 + 2x$26 + 2x$26 + $100 (This setup will give you upto 115 PAR at the bottom of the tank)
for only $248!


---
Please make your move now, as end of May is approaching and the SRP will INCREASE!!!

Please also note that for Flushing area, you can go to Kissena Aquarium on Kissena Avenue to check out the Actinics 2.0 and my new Nano Pico MR16 Series of Reef bulbs.

As usual, for Long Island customers, you can go to Tropical Island Aquarium in Deer Park Long Island, Mike has a large section of my lights to show you all possible usage of my lights-from pico to large systems. He also is making a planted tank demo using my Actinics 2.0 12,000K white and the PAR and the MR16 Series.

I will be showing my MR 16 Series in New World Mall (136-20 Roosevelt Ave 2nd Floor/corner of Roosevelt Ave and Main Street) on Mother's day showing off some of my lights including the Pico Nano MR16 Series. OF course, you can check the my other lights in the shopping center. It's a community event with live band, cooking demo and free medical check up and more seminars. For info, please check out this flyer.



....
NOTE: all prices are introductory SRP and will expires in end of May, so pre order them while the are at lower prices

Spec Tank Combo $198.00

Fluval Spec System Alone $69.95
WingoLED STS12 Light Alone $168
-12x1W LED
-4 heads to tilt for optimal lighting angles
-multi color in each head providing royal blue and 12,000K white



Edge Tank Combo A with 1 Actinics 2.0 12" 9W LED Bar= $225
Choice for color temperature from 8000K upto 18,000K white, 450nm royal blue, 460nm standard blue.
Fluval Edge System Alone $149.95
Light Alone $98


Edge Tank Combo B with 2 Actinics 2.0 12" 9W LED Bars = $300
Choice for color temperature from 8000K upto 18,000K white, 450nm royal blue, 460nm standard blue.
By choosing two bars with different color and timers, you can set night and daylight lighting modes.
Light alone with hanging Kit $225


.... Also available in DIY format

Mod Kit for Fluval Edge $60
-2 x MR16 base (12V ac/dc connector)
-2 x WingoLED MR16-4x1W reef ready bulbs
-2 x connectors for converting the existing transformer
-3 x wire nuts

WingoLED MR16-4x1W reef ready bulbs $25
4x1W
Choice of 12,000K, 450nm Royal Blue, 460nm standard blue
MR-16 12V connector

xDAVMANx 04-16-2011 07:04 PM

Pm sent.

Aqua Pro Builder 04-16-2011 07:13 PM

Quote:

Originally Posted by xDAVMANx (Post 950953)
Pm sent.

SMS me, PM and RB are always full.


347 878 3092

Aqua Pro Builder 05-05-2011 12:12 AM

Please make your move now, as end of May is approaching and the SRP will INCREASE!!!

Please also note that for Flushing area, you can go to Kissena Aquarium on Kissena Avenue to check out the Actinics 2.0 and my new Nano Pico MR16 Series of Reef bulbs.

As usual, for Long Island customers, you can go to Tropical Island Aquarium in Deer Park Long Island, Mike has a large section of my lights to show you all possible usage of my lights-from pico to large systems. He also is making a planted tank demo using my Actinics 2.0 12,000K white and the PAR and the MR16 Series.

I will be showing my MR 16 Series in New World Mall (136-20 Roosevelt Ave 2nd Floor/corner of Roosevelt Ave and Main Street) on Mother's day showing off some of my lights including the Pico Nano MR16 Series. OF course, you can check the my other lights in the shopping center. It's a community event with live band, cooking demo and free medical check up and more seminars. For info, please check out this flyer.

sillysidewinder 05-20-2011 01:22 AM

do you have anything for the chi?

Aqua Pro Builder 05-20-2011 01:27 AM

Quote:

Originally Posted by sillysidewinder (Post 965098)
do you have anything for the chi?

Unless you change the filter part, I have no solution to the block in the center.

sillysidewinder 05-20-2011 01:30 AM

Yeah I mean if I got the light i would just get a small hang on filter for it. Just curious what price range it would be in.

Aqua Pro Builder 05-20-2011 08:53 AM

Quote:

Originally Posted by sillysidewinder (Post 965103)
Yeah I mean if I got the light i would just get a small hang on filter for it. Just curious what price range it would be in.

I assume you are using the Chi that's about 5G, the PAR38 REEF is perfect for the job. Get a E26/27(standard light socket) extension from home depot ($3.99)and hang it down. Don't you have some PAR light from other company before? Use them or switch over to mine and as you can see from members' testmony how much better mine is.

Aqua Pro Builder 05-24-2011 05:04 PM

drew,

You need to be a vendor first to post here while having business information attached.

Aqua Pro Builder 08-22-2011 01:49 PM

Update: 08-22-11


Our MR16 base reef bulbs are now dimmable!
Color mixing and thunder storm effect.

72W 3 channel REMOTE controller with 24W Power Supply $60
72W 3 channel REMOTE controller with 90W Power Supply $100

Bulbs
4x1W $22-$26
3x2W $30-$38

Example:
a set of dimmable LEDs for Edge tank will cost only 2x$22+$60= $104
a set of dimmable LED for Spec tank will cost only $22+$60= $82

a set of dimmable LEDs with 3 colors for Bio Cube 29 will cost only 2x$22 + 2x$26 + 2x$26 + $100 (This setup will give you upto 115 PAR at the bottom of the tank)
for only $248!


All times are GMT -4. The time now is 03:10 AM.