Led's not working. Helppp

[bignick]

I just finished building my DIY led's. My royal blues and working fine with the dimmer but my cresant whites are at a low shine and won't turn brighter with the turn of the dimmer any help will help or ideas thanks

Sent from my PC36100 using Reefs

 

[qy7400]

Double check the last 2 LEDs from the bottom of the picture to make sure you got them soldered correctly as they don't appear to be lit. You can also try swapping the drivers or by-passing the dimmer circuit.

 

[Cadiz.Jonathan]

I had the same problem did u get the dimmable driver. If so did u end up using 2 pots on one power supply? If that's the case get a extra pier supply and separate the pots. One power supply per pot. If not where are u located I could help u out

 

[Aqua Pro Builder]

Check the screws to see whether they are touching the soldering pads.

 

[bignick]

didnt think of that. thanks will do

 

[Mattl22]

Also had same problem 2 bad connections