B-Ionic Calcium help?

[MikeC]

If you currently use B-Ionica and you happen to have a un-used gallon container around I could really use your help.

I need to know how much calcium by measurement you have in the container,I need to know how much RODI to add.

I hade two one gallon containers that were poured into a bucket befor the RODI was added and to make matters wors that bucket was knocked over so now I can't even pour it back into the original container and fill with RODI to the line because I'm not sure how much un diluted cal was in the gal container.

Hope this makes scenes and I could really use someone's help. I have 9 1/2 cups of calcium left.

 

[jcdeng]

not making much sense, but do you have a cal test kit, you can just test how much cal is in the water then you can make adjustments accordingly

 

[jhart]

never mind i didnt read your whole post.. Sorry

 

[Jarrett]

Hey mike if you are having trouble with your levels or just calcium, and the whole dosing thing, feel free to pm me i went through exactly what you are going through and i learned alot and i probally can help you out. i dont quite understand your post so its hard for me to comment.

 

[MikeC]

Ok let me try to explain again.

1. I dose with BRS dosing pumps.
2. My holding container is a 2 gal container that the doser draws from.
3. I purchased 2 one gal containers of B-Ionic calcium.
4. Each gal container has a line on it you are supposed to fill up with RODI to dilute it.

5. I made the mistake of pouring the 2 one gallons of calcium into a bucket befor diluting it with RODI.

6. Bucket got knocked over and I was able to salvage 9.5 cups of undilughted B-Ionic.

7. I'm not sure how much actual calcium Bionic puts in the one gal container and how much RODI is supposed to go in to fill the container up to the line.

8. If some one happens to have a one gal binocs calcium juge could you measure with a ruler how much calcium is in the jug this is usually done with a flash light shined thru the side of the container as instructed by bionics.

this way I know how much RODI to add.

This should make sense if you use b-ionics

Thank you






7.

 

[mbg75]

Pretty sure he need to know how much concentrate in container before adding RO water

Guess I posted same time u did mike

 

[garys reef]

i got brs calcium u just add powder to a gallon of water you can have it ijust ask for you to replace it with the same

 

[MikeC]

Thanks for the offer Gary but I still have some time my cal is good for now I just didnt want to wast this batch.