how to fix a tiny leak in acrylic

[spacenyc]

have a amiricale hang on fuge/sump. developed a tiny drip at the very top seam(maybe a half a dixie cup a day) probably had a bit of dirt clogging drip before i cleaned it. whats best way to stop it, its dry right now as i took it down for cleaning

 

[AlohaTropics]

IPS Weld On Acrylic Glue.


Sent from my iPhone using Reefs

 

[spacenyc]

for a tiny leak do i use #3, 4 or 16 product/where in ny can i buy

what number product is best for a small repair jobs, anyone know where i can buy this in nyc

 

[spacenyc]

thanks for the advice aloha

seems to be the right solution

 

[TRIGGERMAN]

I don't know what #, I would actually like to know myself. I believe home depot/lowe's carry it.

 

[tynman]

I just got done building my frag tank. I used weld on 4 to do it all and at the end the top brace gave me a problem so I use that and weld on 16. 4 is like water and the 16 is more like a paste. If you can move the box around I would use the 4 cause it will get into the hole, but you will have to hold it to where that gravatiy will help the weld on 4 get in the hole and then you have to hold it down. Now buying it around here good luck the 2 places in jersey I found wanted a $100 min order so I went online and get all the stuff and I think it came from cal.

I don't know what #, I would actually like to know myself. I believe home depot/lowe's carry it.

 

[tynman]

I just found on here andyfromsouthjersey is selling both of these 4 and 16 might be cheaper to go that way.