Nylon screws

[John]

Nylon screws for Magdrives.

Anyone have 8 extra nylon scews for the mag drives or know where I can pick them up?

 

[House of Laughter]

Home depot, Lowes or ABsolutely fish in Clinton NJ sells them behind the counter.

House

 

[Dace]

Home depot, Lowes or ABsolutely fish in Clinton NJ sells them behind the counter.

House

i need also. how do i know which is the right one

 

[ShaunW]

I have them for Magdrives 3,5,7,9.5. PM me your address and how many you need and I will mail them to you. I don't want any money for them, just trying to help out the MR community.
Shaun.


EDITED!! INFO FOR MAGDRIVE PUMP SCREWS!!

Screw size information for Magdrive pumps: 440, 632, 832, 1/4-20 on the link I gave should write like 4-40, 6-32, 8-32, 10-32.... The first number stand's for diameter of the bolt, while the second number stand for number of threads per inch. Example: 1/4-20 is a bolt 1/4" dia. with 20 thread per inch. Screw that have diameters smaller than 1/4", one will use number instead ( 4, 6, 8, 10 ) Ex: 8-32 is mean screw size 8 with 32 thread per inch.

So the 8-32's in 5/8" or item number 91480 (5/8"L x 832 Thread Nylon Round Head Slotted Screw) are the ones to order for Mag's 3-9.5, .

http://www.usplastic.com/catalog/pro...uct_id=15584

I don't have any information on Magdrives above 9.5. So your going to have to measure the screw length and thread count yourself (I don't own these pumps, so I never researched them).

 

[masterswimmer]

I have them for Magdrives 3,5,7,9.5. PM me your address and how many you need and I will mail them to you. I don't want any money for them, just trying to help out the MR community.
Shaun.

Hey Shaun, I can use them also. I'll pay for them + shipping. I can use about 50 of them. Just tell me how much and where to PP you.

Thanks,
Russ

 

[ShaunW]

Hey Shaun, I can use them also. I'll pay for them + shipping. I can use about 50 of them. Just tell me how much and where to PP you.

Thanks,
Russ

Russ, I only have about 30 left and I have already promised some of that to the members here. So I don't have 50. If you need 8 or less I can send them to you ASAP. I will try and find out where I got them from and post up the info here on MR in the next day or two so that you can order for yourself 50 or more.

 

[DRZL]

Solbby thanks again for the screws theyre perfect for the mag 9.5 I can attest

 

[masterswimmer]

Russ, I only have about 30 left and I have already promised some of that to the members here. So I don't have 50. If you need 8 or less I can send them to you ASAP. I will try and find out where I got them from and post up the info here on MR in the next day or two so that you can order for yourself 50 or more.

Shaun that's cool. LMK how much you paid too. I will pay you for the 8. I've got at least 8 mag drives running right now (that I can think of). So I can start with my oldest ones first. Thanks.

Russ

 

[ShaunW]

Solbby thanks again for the screws theyre perfect for the mag 9.5 I can attest

Cool, glad to help out, I would never want what happened to me to happen to another reefer in the MR community, :grouphug: .

Russ PM me your address and I will mail out 8 to you.

 

[DRZL]

one thing I did find was that the HD scrws (at least for me) at the right diameter were too long, all it takes is a cutter to bring them to the desired sized, it doesnt affect the thread at all

 

[Pedro]

Does anybody know the exact size for a mag18, i need to get those. Thanks to shaun for providing the screws for my smaller mag.

 

[Noodus]

are there any screws left i'd like to buy 8. for a mag 7 and mag 3

 

[ShaunW]

Screw size information for Magdrive pumps: 440, 632, 832, 1/4-20 on the link I gave should write like 4-40, 6-32, 8-32, 10-32.... The first number stand's for diameter of the bolt, while the second number stand for number of threads per inch. Example: 1/4-20 is a bolt 1/4" dia. with 20 thread per inch. Screw that have diameters smaller than 1/4", one will use number instead ( 4, 6, 8, 10 ) Ex: 8-32 is mean screw size 8 with 32 thread per inch.

So the 8-32's in 5/8" or item number 91480 (5/8"L x 832 Thread Nylon Round Head Slotted Screw) are the ones to order for Mag's 3-9.5, .

http://www.usplastic.com/catalog/pr...=USPlastic&category_name=121&product_id=15584

I don't have any information on Magdrives above 9.5. So your going to have to measure the screw length and thread count yourself (I don't own these pumps, so I never researched them).

 

[masterswimmer]

Russ PM me your address and I will mail out 8 to you.

Thanks man, but I'll only send you my address if you let me paypal you the cost of the screws and shipping. If you want something for yourself it's worth it to me also. Thanks.

Russ

 

[ShaunW]

I really don't want you to paypal me money. We are only talking about a dollar or two. Send me your full name and address.

 

[ShaunW]

are there any screws left i'd like to buy 8. for a mag 7 and mag 3

PM me your name and address and I will send some out to you.

 

[masterswimmer]

TYVM....PM sent.

Russ

 

[Dace]

Russ, I only have about 30 left and I have already promised some of that to the members here. So I don't have 50. If you need 8 or less I can send them to you ASAP. I will try and find out where I got them from and post up the info here on MR in the next day or two so that you can order for yourself 50 or more.

you got PM

 

[ShaunW]

Does anybody know the exact size for a mag18, i need to get those. Thanks to shaun for providing the screws for my smaller mag.

Pedro, I mailed out the replacement screws for you (I think I put four in the envelope and wrapped them in plastic this time). LMK if they don't arrive.

John I also mailed out your today.

I will mail out the others tomorrow, i.e. David and Russ.
Shaun.

 

[masterswimmer]

I really don't want you to paypal me money. We are only talking about a dollar or two. Send me your full name and address.

Shaun,
Actually I was thinking you'd want me to PP you 100 Billion dollars.....no, no, make that 100 Million dollars!! :lol: