Recent content by MrZ

I'm in the middle of setting up a AGA 54g corner with a custom stand and canopy. Unless you REALLY enjoy DIY like I do - cant recommend it. I've spent hours with graph paper and a compass figuring out how to fit all of the lighting and gear above and below the tank. Building an oak stand to...

Look in to a product called Spa-Flex. It is available from alot of quite a few pool and spa stores as well as some Home Depots. I just started working with it and its quite nice to plumb. Standard OD and ID as rigid PVC tubing and can be solvent welded with normal PVC glue to normal SCH40 PVC...

Incidently, Is your tank drilled (RR)? If not and you are using hang on siphon overflows you could turn your tank around. My mag float hasn't given me any problems but I always pop it off and let it float up and make sure it is nice and clean before I use it. -Z

Hiya guys, I'm currently setting up a AGA 54g corner with builtin overflow atm. Looks like I'm jumping in on this thread a bit late but if Hwarang / Morganjen or others are still in the planning stages perhaps some idea sharing might be in order. I have the AGA 54g corner - the overflow is...