Chiller install

[Amadeusb12]

I have a 1/4 h chiller to install on my 120H. I'd like to plumb it in a closed loop with UV sterilizer and the custom flow already running. The chiller is rated for 590-1057gph, the UV I need to check. The chiller will be sitting 1ft below bottom edge of tank. What pump do you recommend??

I'll check the UV flow rate.

okay...flow rate is max of 760gph on the 25w UV

Let me know, so I can hook this bad boy up!
B

 

[MO~IDOL]

How about gravity fed the bad boy with the over flow just a thought.

 

[saltycreefer]

Why dont you run it inline with your return? save $

 

[PalmTree]

If your return pump is rated at or below 760 gph I would use that but if you are set on adding a closed loop than I would use something another pump. Maybe something like an Eheim or similar. Don't know if you plan on drilling your tank or if you are going to use an overflow.