Anyone do a Biocube 29 stand assembly?

[FlyPenFly]

So it seems the two side panels really bear all the load with the rear panel not really being a structural piece.

A problem I had though was that I ended up with 2 extra screws in shiny metal. I used all 8 of the big black hex screws. Four for the top, four for the bottom. In the picture it seems like there's supposed to be a rear spot for the two unfinished shiny screws but there's no precut hole and I can't figure out where else it would go?

I have the version with 2 doors, no glass.

Any ideas?

 

[eazy al]

Maybe for door nob extra,do you have the manual

 

[FlyPenFly]

The door knobs are securely attached, that's what I thought too first. The manual only possibly shoes that there are two screws that go in the back panel but there are no cut holes or anything,

 

[eazy al]

The manual usually tells you the size n what they are for ,oh how about to adjust the hinges

 

[Jeanethics]

I just finished Building Mine, I have the same screws left over, I believe they are just extra smh... I couldn't figure out where these went