ATI lighting fixure hanging help

[TRDfan]

I just purchased an ATI fixture but I cant drill into the ceiling to hang it up. Neither can I drill into the back of the stand to mount a hanging arm. I need to find a fixture hanger that mounts to the rear tank glass.

similar to this
http://www.dhgate.com/store/product/small-fish-tank-lamp-hanger-clamps-stainless/213469075.html

any1 has an idea where I can buy something similar to this?

 

[b-ridge]

Awesome light bro. I recently bought the 60 inch 8 bulb module. Am in the process of looking for LED strips to go along with it
Sorry I can't help you with your dilemma. I'm hanging mine from my canopy
By chance did you try the butterfly screws? They should definitely work plus there cheap

 

[TRDfan]

yea I got the 24" 8 bulb for my 92 cube. I need to figure out how to hang it though....

any1 with any suggested will be helpful. thanks

 

[theMeat]

Something like this maybe

https://www.amazon.com/dp/B00E9LU9OS/?tag=reefs04-20

 

[Relz]

I would suggest mount it from wall behind the tank. I don't think any clip on would work on a fixture this heavy. Something similar to what holds up a book shelf.

 

[TRDfan]

Something like this maybe

https://www.amazon.com/dp/B00E9LU9OS/?tag=reefs04-20

thanks.

This is the only thing that I found too but it mounts on the sides of the tank. I'm looking for something from the back/rear of the tank

 

[theMeat]

Think something that hold onto the back of the tank only would cause too much stress to the glass imo. Unless you find or make something that goes down and attaches to the stand

 

[Arnaldo24]

I use electric conduit. Hook it up to the back of the stand. Simple and easy. Never had a problem

Sent from my iPhone using Tapatalk

 

[FMF0331]

...

...