Booster Pump help

[xclusive252]

Hello I just got my booster pump from air water and Ice and I have no clue on how to get it to work I have it plugged correct and all but cant seem to fine tune it so it will increase pressure. I am asking that someone plz help me. I will post a link of the pump and hopefully someone has some good help for me as I would like it so I can start setting up my 150g.

Here is the link of the pump:
http://www.airwaterice.com/c=DRk0x2...ump-System-Power-Station-for-Reefkeepers.html

Also on my ro/di its semi new I got it new from tito and its rated 150gpd all filters and membrain are new maybe 150 gal of water threw them. My psi on my water from the wall is 22 so the meter says and i have it set up with a T and not the piece thats pierces the copper pipe. I live in ridgewood if anyone lives near I will gladly pay a few bucks for help with set up tyvm again all who have advice

 

[tomtoothdoc]

hey eddie,
i have a different pump but they all should be plug and play. the line from the cold water pipe goes to the prefilter before the pump and the line out from the pump goes to your ro/di intake. i would assume the unit need to be making water and the pump running to adjust the pressure valve....using the hex wrench. if the holding tank is full, the float valve triggers the auto shut off to stop making water.....so remove some water to trigger it "on".
does that sounds right to you?

 

[InfernoST]

My pump (Aquatec CDP-8800) has a tiny allen key on the top of the unit that is used to adjust the pressure.

 

[eddie1272]

I bought one from awi in january,customer service was not great. Ended up being a defective pressure switch ,wich I got the impression was common. Long story short Rodi unit from them is awesome, booster pump from them sucks. I returned mine.

Sent from my DROID2 GLOBAL using Reefs