ETS or Bullet 2 ?

[Anonymous]

Iron, I don't think any of the MAG line pumps are pressure rated, if I use any pump that are not pressure rated in a pressure applcation, the pump will heat up along with the water in the tank, have you heard that SEN is coming out with a 1200 model? I can't find any info on it and wonder if that's true.

 

[Anonymous]

After reading more about the Bullet,
I would go w/the ETSS800 agin. My research was intense and my final choice was based on (results) visual results of others.
one example: http://reality.sgi.com/tritran/reef/

 

[Anonymous]

I can't find the sen 1200 or have been trying but hear ppl at reefs chat say there is one. The bullet3 is a little cheaper in price as the etss800 which is a good skimmer but they both function the same and both use the same pumps but bullet3 is made better and uses a becket injector to make smaller bubbles which makes it have the edge. The only thing that is made of better quality on the b3 than the etss is that bullet uses a better gate valve. not much but still better.But as said over and over any top skimmer is good as long as it foams.