How to update firmware on apex Neptune
- Thread starter OGGISPORTS
- Start date
- Location
- Flushing, NY
http://reeftech.webs.com/
Its in that document
Its in that document
**Before you do upgrade make sure you're wired
**Wireless connections MAY fail leaving APEX with no software
Download the firmware from Neptune, http://www.neptunesys.com/apex_4_05.zip
Unzip.
Run the Apex flash utility
Fill in all fields, defaults are auto filled in there but if you changed the password or port you will need to change them in the software.
Update firmware.
Update web pages.
Log into controller and verify new firmware, Configuration -> Network Setup (on bottom)
Update all modules, Configuration -> Module Setup
Choose each module from the pull down, select the upgrade firmware button and submit.
**Wireless connections MAY fail leaving APEX with no software
Download the firmware from Neptune, http://www.neptunesys.com/apex_4_05.zip
Unzip.
Run the Apex flash utility
Fill in all fields, defaults are auto filled in there but if you changed the password or port you will need to change them in the software.
Update firmware.
Update web pages.
Log into controller and verify new firmware, Configuration -> Network Setup (on bottom)
Update all modules, Configuration -> Module Setup
Choose each module from the pull down, select the upgrade firmware button and submit.
Sponsor Reefs
We're a FREE website, and we exist because of hobbyists like YOU who help us run this community.
Click here to sponsor $10:
