LED Dimmer MOD

[earthguy00]

Hey guys,

Was wondering from anyone that has upgraded their
LED fixture that did not come with a dimmer to adding
one?

If so, can you share some light to where I can get this
particular controller or direct link?

It would be mighty noble.

thx.

 

[MO~IDOL]

I use this one works wonder....

http://www.xpressdiy.com/shop/#ecwid:category=1848959&mode=product&product=7994455

 

[ruha456]

Hey Mo I have the plug and play DIY rapid led kit you know if this dimmer will work for that kit???

 

[DaddyReefer13]

You can try this link for Rapid LED.

I did a DIY using these same instructions:
http://www.vinnymarini.com/pictures/rapid_docs/RapidLED_diy_dimmer.pdf

good luck

 

[Aqua Pro Builder]

Both kits above rely on what LED you got.

The first kit Moi mention works with decorative type LEDs directly, such as RGB so if your input is 12V DC, it outputs 12V DC. It's a voltage driver, NOT A CONSTANT CURRENT driver. However, it can be used as a dimmer for the some Meanwell DIMMABLE drivers too.

The second one Daddy mentioned is a resistive dial compatible to some Meanwell drivers but if you got a driver, even dimmable ones, that are not resistive dials compatible, then it won't work.

So we need to know what LED setup you have before we can actually suggest you to the right choice.

 

[MO~IDOL]

Hey Mo I have the plug and play DIY rapid led kit you know if this dimmer will work for that kit???

yes it will I've the Rapid dim kit with my diyLED. my drivers dim only 40%-100% but with this one it can dim from 0-100%. contract them they'll expend everything u need to know they have a wire diagram on site some where.

 

[ruha456]

Hey Wingo what's your email I want to ask you something but your not accepting private pm's.

 

[Aqua Pro Builder]

Hey Wingo what's your email I want to ask you something but your not accepting private pm's.

My email is [email protected]

I think the icon at the bottom my avatar on the left also allows you to email me.