Led Driver

[Cibo]

I'm looking for a drive for my led fixture. The only info on it is 80-130v 520 ma. I'm having a tough time finding one. Any ideas where to look?

Its is one of the ebay lights! If I cant find a new one does anyone have any parts from an old one pm me! see enclose photo of the driver

Ps Got SPS!

 

[Geraud]

Is that the input or the output?

Have you checked on the stuff available on Meanwell? They have a lot of choice...

 

[Cibo]

Is that the input or the output?

Have you checked on the stuff available on Meanwell? They have a lot of choice...

What is meanwell?

 

[Geraud]

Meanwell are a manufacturer of ballasts and LED drivers. Quite popular among the DIY crowd since you can get nice drivers from them which often include dimming too.

http://www.meanwellusa.com/

 

[Cibo]

Thanks I will try them~~

 

[Aqua Pro Builder]

You should list this in want to buy section before vendors can really answer. This is a very common drivers, except the lower current setting, from many vendors in MR

 

[jhart]

I have a brand new driver , I ordered a few from china . $30

 

[jhart]

Meanwell from what I gathered will not work on those Chinese fixtures 3*55 watts . Ied make sure before buying them.

 

[bhazard451]

I have a brand new driver , I ordered a few from china . $30

Where did you buy these?

If they were 580-700ma, I could possibly use some of these.

To the OP, find out from your ebay seller which company the lights come from. Replacements are easy to get.

 

[jhart]

Where did you buy these?

If they were 580-700ma, I could possibly use some of these.

To the OP, find out from your ebay seller which company the lights come from. Replacements are easy to get.

I got them from china . alibaba.com

 

[Aqua Pro Builder]

Where did you buy these?

If they were 580-700ma, I could possibly use some of these.

To the OP, find out from your ebay seller which company the lights come from. Replacements are easy to get.

when the current goes up, the max voltage(max LED counts) goes down, you need to know how many LEDs in the configuration.
For example, a 750ma one will only operate at 55-75V

 

[Aqua Pro Builder]

OP,

Check whether your driver is 0-10V dimmable or just dimmed with a dial? They are different.

 

[jhart]

OP,

Check whether your driver is 0-10V dimmable or just dimmed with a dial? They are different.

Yes 0-10v is different than most Chinese lights that dim . Those Chinese lights dim based on resistance .

 

[Cibo]

my light is not a dim one how do you tell the demand for the leds?