- Location
- Long Island
not sure of what would be a good skimmer for my 39 gallon reef tank lmk.
Thanks.
Thanks.
need a new protein skimmer
- Thread starter Adoug53
- Start date
- Location
- Westchester, NY
What is your bioload like? What are your parameters now?
- Location
- Long Island
the tank has a lot of coral and decent amount of fish parameters are good but id like the nitrates lower
ammonia- 0ppm nitrites-0ppm ph-8.2-8.4 nitrates-5
ammonia- 0ppm nitrites-0ppm ph-8.2-8.4 nitrates-5
Last edited:
- Location
- NY
Do you run a sump? Will you require a HOB skimmer? Need more info before the experienced members can respond.
Russ
Russ
- Location
- Long Island
sump in the cabinet
- Location
- NY
How much space in the skimmer chamber do you have available? LxW and even height restriction would be needed to make recommendations.
Russ
- Location
- Long Island
i have a 6 inch width and 10 inch length in the chamber and 24 inch height clearance inside the stand
Last edited:
- Location
- NY
wow, that's a tiny space. Even this small Reef Octopus is .75" too big:
Reef Octopus 4" Pinwheel In-Sump Skimmer
You don't have much room for a skimmer. You're going to be extremely limited on your choices. Are you sure those measurements are precise?
Russ
- Location
- Long Island
then i think i will go with a hang on the back skimmer like http://www.bulkreefsupply.com/prote...-bh1000-hang-on-the-back-protein-skimmer.html
- Location
- Long Island
that is what i thought but i don't have an ato system so the water level would always change in the sump
- Location
- NY
The easy fix to this problem is......drum roll please......get an ATO. They really aren't that expensive (especially when compared to the total expense of this hobby).
Russ
Sponsor Reefs
We're a FREE website, and we exist because of hobbyists like YOU who help us run this community.
Click here to sponsor $10:
