hey guy, like MRSW.TV said in this hobby there are always change. im in the process of a new stand build do to the fact of a sump/skimmer upgrade.
plans are:
90g
48 1/2 x 18 1/2 x 32
the 48.5 spans will be out of solid red oak 1 x 4. and a .25 x 2'' metal brace running the length of the span.(just in case) no center brace.
each conner will have a 1.25x1.25x32 solid red oak(cube).
top will have 3/4 oak ply 48.5x18.5
top will have a 1x4x17 brace
sides 3/4 oak ply 32x18.5
back same a the front but with the center brace 1x4 solid red oak.
botton will have a 3/4 oak ply as well...
this is were a got the idea from..
http://saltaquarium.about.com/od/diystandscabinets/ss/DIYoakcabinet_2.htm
http://0.tqn.com/d/saltaquarium/1/0/q/Q/1/DIY_OakCabinet_Graphic_500.JPG
:spin::spin::spin:
is there any carpenter that may have a kreg or will do some pocket for a fellow reefer or a box of beers:cheers:
plans are:
90g
48 1/2 x 18 1/2 x 32
the 48.5 spans will be out of solid red oak 1 x 4. and a .25 x 2'' metal brace running the length of the span.(just in case) no center brace.
each conner will have a 1.25x1.25x32 solid red oak(cube).
top will have 3/4 oak ply 48.5x18.5
top will have a 1x4x17 brace
sides 3/4 oak ply 32x18.5
back same a the front but with the center brace 1x4 solid red oak.
botton will have a 3/4 oak ply as well...
this is were a got the idea from..
http://saltaquarium.about.com/od/diystandscabinets/ss/DIYoakcabinet_2.htm
http://0.tqn.com/d/saltaquarium/1/0/q/Q/1/DIY_OakCabinet_Graphic_500.JPG
:spin::spin::spin:
is there any carpenter that may have a kreg or will do some pocket for a fellow reefer or a box of beers:cheers:
