• Why not take a moment to introduce yourself to our members?

cali_reef

Fish and Coral Killer
Rating - 97.3%
36   1   0
Got a 250W CoralVue electronic MH ballast from Fritz to play with, here is what I found so far with a 12 months old XM10K bulb:

1. ballast take longer time to recycle between on and off, longer then Icecap and PFO tar ballasts I've used in the past(almost 30 minuets, I'll continue to monitor this).
2. The lowest dim setting uses 153W\1,27amps per the Kill-a-Watt meter (my home electricity perimeters are, 120V and 59.9Hz).
3. The full bright setting uses 255W\2.13amps per the Kill-a-Watt meter.
4. The dimming range is clearly visible, but nothing like a typical home lamp dimmer where the range is significantly greater.

I will set up my PAR meter to check the total PAR output at different settings and also compare it to a Icecap at full power setting later today.

Stay tune.. This may be a promising ballast for someone who don't need the full 250W intensity for the moment but don't want to waste money on 150W setups just to upgrade down the road.
 

inline6

Advanced Reefer
Location
Queens, NY
Rating - 100%
29   0   0
Thanks for the data, I'm pretty sure we can all benefit from your testing.
As soon as prices come down on these people will have more of these to play with and weigh the cons & pros of such a unit.

Keep us updated.
 

cali_reef

Fish and Coral Killer
Rating - 97.3%
36   1   0
inline6 said:
Thanks for the data, I'm pretty sure we can all benefit from your testing.
As soon as prices come down on these people will have more of these to play with and weigh the cons & pros of such a unit.

Keep us updated.

FYI, these are cheaper than Icecap right now, you can find them locally for $119, no tax if the vendor don't try to rip you off. I have not seen any other online vendor listing them yet but I am sure they will soon.
 

cali_reef

Fish and Coral Killer
Rating - 97.3%
36   1   0
Okay, rigged up my Luminarc III reflector so the bulb is 20" away from the Apogee PAR meter's sensor, at full dimming it is reading 115 PAR and 235 at 100% power. The Icecap at the same test setting reads as follow: 120.4V, 59.9Hz, 2.22amp, 252Watts, 338PAR.

Soo, another dud from CoralVue!!. It uses the same wattage at full bright but puts out significantly less PAR compared to the Icecap. It is not worth the wattage used unless you are looking to have the ability to waste electricity in order to run a dim tank.

I need to rig up my 150W Iwasaki 50,000k bulb with a 150W Icecap ballast and see how it compares with the CoralVue on dimmed setting.
 
Last edited:

fritz

OG of this here reef game
Location
Marine Park
Rating - 95.9%
47   2   0
!? I didn't make the ballast! Just sold it. That's crazy and what good info. I"m going to have to bring my new lights over one day so we can test them to. We should have a bunch or articles like this with actual info. Thanks for taking time and money to run a test like this for everyone's benefit.
 

cali_reef

Fish and Coral Killer
Rating - 97.3%
36   1   0
Thanks Guys, just really bored and can't go no where with my bad knee.. Hope this information helps people, I might get really motivated and run the same test on my PFO HQI's when I do the 150.

Fred, I have to be in my office this week, so no more playing from home:). Maybe next week if you want to test the par and electricity consumption on your new light fixtures .
 

Sponsor Reefs

We're a FREE website, and we exist because of hobbyists like YOU who help us run this community.

Click here to sponsor $10:


Top