need part name for BRS dual reator please

[james1990]

hey guys, setting up my new sump and i want to run the brs dual reactor off my return pump instead of running a separate pump. Im not sure if I misplaced a supplied part or if I need to purchase it.

what part do I need to tap into my return line to run my reactors? thanks

 

[MikeC]

It sounds like your looking to build a manafold off your return pump?
You can do this yourself thru home depot , if your return line is say one inch you would need to T off of that and step it down to 3/4 going to the reactor with a ball valve inbetween for flow control.

 

[mbg75]

Here you go. Tee with a John guest fitting.

 

[james1990]

Clutch!! thanks for the help man. That John fitting didn't come with it did it? Also, what size John fitting do I need if you happen to know.

Again thanks

 

[mbg75]

Clutch!! thanks for the help man. That John fitting didn't come with it did it? Also, what size John fitting do I need if you happen to know.

Again thanks

Got it at ace hardware. Think it was 1/2" od. But bring a piece with u to double check.