RODI--No water

[FiNeMaN]

So i replaced the filters, membrane and resin in my RODI
Hooked it up o my faucet adapter and voila....no product water. had it running for 2hrs without luck.
i am getting waste water so the water is making its way to the membrane but??????
Any thoughts?

 

[kenconnect]

I had the same problem with mine but the i had some water coming out but as the colder temp. Come around the less water u willl get out of ur ro unit.

 

[peteyboyny]

Just pulled mine apart, found the line from the micron fiber to carbon block canister was blocked. maybe something got in there while you had them apart? I would take all your lines off 1 at a time, and make sure nothing is causing blockage. Just what worked for mine.

 

[MatthewScars]

Take everything out and put in one filter at a time. This will show you where the blockage is.

 

[mbg75]

If u getting waste water, then its making its way thru the filters. Either the membrane is in wrong or the flow restrictor is damaged or missing.
Did u just get this unit or have u used it before?

Sent from my ADR6300 using Tapatalk

 

[Buckeye Field Supply]

What is your water pressure?

 

[al0ha]

U might need a booster pump, water might not be makin its way thru the dense ro membrane

 

[FiNeMaN]

If u getting waste water, then its making its way thru the filters. Either the membrane is in wrong or the flow restrictor is damaged or missing.
Did u just get this unit or have u used it before?

Sent from my ADR6300 using Tapatalk

I've used it before.

 

[FiNeMaN]

What is your water pressure?

Dont know what the water pressure is but it is low. Takes practically all night to fill a 5gal bucket.