Neptune Aquacontroller III programming critique

[cmantis]

First time programming this controller hopefully some 'experts' out there can critique my job. I have email working so would appreciate suggestions on what email alerts to set too. Also I can't seem to get it working here so I can have a fancy signature even though I can access it over the web (have setup dynamic ip).

* This is a three tier rack setup with two DT's and Sump *

LT1$-A01 (LED1 - blue)
LT2$-A02 (LED1 - white)
LT3$-B01 (LED2 - blue)
LT4$-B02 (LED2 - white)
PM1#-A03 (Tank1 - pump1)
PM2#-A04 (Tank1 - pump2)
PM3#-B03 (Tank2 - pump1)
PM4#-B04 (Tank2 - pump2)
HT1%-A05 (Heater1)
HT2%-B05 (Heater2)
RTN&-A06 (Return Pump)
ATO$-B06 (Auto Top Off)
FUG$-A07 (Fuge Light)
CO2&-B07 (GX CO2 Regulator)
MLW#-B08 (Milwaukee SMS122 Controller)
ALM&-A09 (Email Alarm)


If Time > 12:00 Then LT1 ON
If Time > 00:00 Then LT1 OFF
If Time > 12:00 Then LT3 ON
If Time > 00:00 Then LT3 OFF
If Time > 14:00 Then LT2 ON
If Time > 22:00 Then LT2 OFF
If Time > 14:00 Then LT4 ON
If Time > 22:00 Then LT4 OFF
If Time > 00:00 Then FUG ON
If Time > 12:00 Then FUG OFF
OSC 010/010 ON/OFF Then PM1 ON
OSC 010/010 ON/OFF Then PM2 OFF
If FeedA 000 Then PM1 OFF
If FeedA 000 Then PM2 OFF
OSC 010/010 ON/OFF Then PM3 ON
OSC 010/010 ON/OFF Then PM4 OFF
If FeedA 000 Then PM3 OFF
If FeedA 000 Then PM4 OFF
If Temp < 78.0 Then HT1 ON
If Temp > 78.5 Then HT1 OFF
If Temp < 78.0 Then HT2 ON
If Temp > 78.5 Then HT2 OFF
If FeedA 000 Then RTN OFF
If Switch1 OPEN Then ATO OFF
If Switch1 CLOSED Then ATO ON
If pH > 08.85 Then ATO OFF
If pH < 07.90 Then CO2 OFF
If pH > 07.95 Then CO2 ON
If pH < 07.90 Then MLW OFF
If pH > 07.95 Then MLW ON
If Time > 00:00 Then ALM OFF
If Time > 00:05 Then ALM ON
If Time > 00:10 Then ALM OFF
If Temp > 79.5 Then ALM ON
If Temp < 77.0 Then ALM ON
If pH > 08.55 Then ALM ON
If pH < 08.00 Then ALM ON
If Power 000 Then ALM ON

- What does it mean if it is underlined in red?

 

[Widdy]

For your signature, here are the instructions http://www.reefs.com/blog/reefs-me-instructions/

Which lines in your programming is in red?

 

[cmantis]

I can log into my controller from the web no problem but when I put my public ip, port and authentication into reefs.me I get:

Unknow feed structure detected - Array ( )