Apex probe Question

[Custom05Taco]

I have a 14 gal biocube buying an apex this week. Just wanted to get suggestions on what chamber the probes should go in?
The middle chamber has the intank media basket. My chamber choices are the right chamber which has the heater in it or the left chamber with the return pump and ATO float switches.
Any suggestions, comments and advice is always appreciated thanks in advance.

 

[NYCEnglish]

I would put them in the return pump chamber and away from the heater. That way your probes are one chamber away from the DT and should represent the closest to DT parameters.

 

[Custom05Taco]

Would you recommend splitting the probes up I'll have PH,Temp and ORP

 

[NYCEnglish]

I have mine in the same chamber of my sump with no issues. Just try to not let them touch each other.

 

[Geraud]

Some vendors tell that getting them too close can make interferences between them, so try and spread them as much as possible inside the chamber. Depending on your water flow, for such a small volume you should not have much difference between DT and chamber anyway.

 

[Custom05Taco]

That's good to know! Thank you! Think I'll put them around my UV light so they don't touch. I don't think the UV light will cause interference.