Need help with water flow. mp40qd vs mp10qd

[chiromanta]

Hi. I have 165G custom tank 4ft long 2ft wide and 3ft high. LPS dominant 2 tall towers with sps on top. right now i ran one Gyre fx150, but not too happy with this product. i want two opposing currents.
should I go with 2 MP40QD or I can get a way with 2 MP10QD.
The bottom is sand and the tank is heavy stoked with fish.
thank you so much for your help.

 

[chiromanta]

This is the tank pic so have an idea on aquascape if it matters. you can se the Gyre FX150 in the top left corner.

 

[Serega]

Mp10's won't hold on anything thicker then 3/8 of an inch, even 3/8 you would have an issue ones in a while with the wet side sliding down. So get your self two Mp40's and you will be happy.

 

[chiromanta]

Mp10's won't hold on anything thicker then 3/8 of an inch, even 3/8 you would have an issue ones in a while with the wet side sliding down. So get your self two Mp40's and you will be happy.

Thanks for advise. Are you talking about Mp10qd or the older version?

 

[Serega]

Both
Info below is for Qd

Nice looking tank, by the way.

 

[chiromanta]

Both
Info below is for Qd

Nice looking tank, by the way.

thanks for info. appreciated.