new JbJ nano pump!!!

[Cibo]

well I have the tank 2 years an this is the 3rd stock pump, can someone tell me a diffrent pump that i can use that will fit the back of the jbj nano 24 cube.... with the same or better water flow.... links would be great.

I dont want to buy another thing from jbj i am sick of getting :bunnies: by them!!!!

 

[chazertis]

mj900 or mj1200 are solid choices....

http://www.reefgeek.com/equipment/Pumps/Maxi-Jet_Powerheads/

 

[FRY]

MaxiJet 900

 

[TimberTDI]

I use 2 mj 900 in my AP 24.

Steven

 

[Henrye]

I'm using a MJ1200 and a 900 in an AP. The other pump I've heard of people using in a JBJ is the Rio 6HF (high flow supposedly)which provides a flow rate of 350gph @ 1 ft and uses ~13W. I'm thinking about getting it after I'm sure it will fit an AP (definitely fits a LBJ) for the rear chamber, and a 6025 nanostream. It would save me about 10W (every one counts regarding heat) and give me greater flow.

Henry

 

[FRY]

Maxijet 1200.

So...I removed the stock pump from the last chamber. I had to cut the plastic ties on the tubing to get the tube off the pump. I had extra Eheim tubing and replaced the tubing that came with the Nano and also reapplied the ties. The stock pump I use it for mixing sea water for water changes.

 

[FRY]

very good info for jbj24
http://www.nano-reef.com/forums/index.php?showtopic=54602&hl=steelhealr&st=0

 

[Cibo]

Thanks for the quick help!
would the mj 1200 be too strong or is strong better!

 

[FRY]

it works fine in my tank

 

[Cibo]

fry
will the 1200 fit on the tube that the old pump was on, have you mod the back at all or are you running it oem except for the new pump if so what have you done to the back and how long has your tank been running

thanks

 

[FRY]

my tank has been 14 months, my jbj 12 about 2 years,the pump fits right on the stock tubes

 

[FRY]

i have a secio 620 iside the tank allso