Any one have an ideas on a way to mount RO tubing to the ceiling or walls? Looking to run a line from my RO unit in my closet to my new ATO container about 15 feet away but don't want it running on the floor where it can be tripped over.
solutions for mounting RO tubing?
- Thread starter reefiness
- Start date
That would be nice, but looking for something lower budget. haha. I actually am seeing a lot of stuff for cord management with adhesive stickies that im considering but would love if I can find some of the ones that have the pull tab for removal which i cant find.
Lowes or home depot.
Wire management cord covers
Sent from my SM-G892A using Tapatalk
- Location
- Licensed & Insured in NJ/NY
What about those coax white plastic clips with nails? They come in many different sizes. I have a ton if you need.
Sent from my LG-H910 using Tapatalk
Sent from my LG-H910 using Tapatalk
60' run....
I was thinking of a 60' run myself.....
U leave the unit on all the time and control with float valve?
Not a worry ? Leaving water on with just control valve safety ?
I was thinking of a 60' run myself.....
U leave the unit on all the time and control with float valve?
Not a worry ? Leaving water on with just control valve safety ?
put up crown molding....Haha.
I run rodi from bathroom to fish closet through the wall and from fish closet to tank in living room about 60 feet
Sent from my SM-G892A using Tapatalk
Ghl controller.
I use a rodi booster pump for my ato that is in another room.
The reservoir line only goes down 3 gallons into the reservoir in case it gets stuck on.
Learned lesson and flooded house before.
I dont go directly from rodi unit.
Sent from my SM-G892A using Tapatalk
how did you flood the house? im planning on doing a direct hook up to the RO unit. Will control it with an APEX solenoid for a low and high as well as the float valve where it goes into the ATO reservoir which will be a little above the high sensor.
I had a union on my plumbing manifold blow out.
The return pump was on a battery back up and the ato kept running.
40 or so gallons drained.
Sent from my SM-G892A using Tapatalk
So these second ones I ordered work great. At the smallest setting, there is enough room for the ro line to wiggle so im not worried about crimping and possible water leaks. Overall happy with it. I'll use the smaller clips I got to start securing up some of my wires and such I guess.
New clips that work:
https://www.amazon.com/gp/product/B01M6U9Q9C/?tag=reefs04-20
New clips that work:
https://www.amazon.com/gp/product/B01M6U9Q9C/?tag=reefs04-20
Sponsor Reefs
We're a FREE website, and we exist because of hobbyists like YOU who help us run this community.
Click here to sponsor $10:
