Lacking in the flow department!

[Anonymous]

Merry Christmas!

I have a brand new Sen700 pump sitting in a closet right now and I was wondering if there is anything I can do with it to increase flow in my tank.

I have a 90g tank and I want more flow. Can I use this pump in any way?

Thanks!

Ace

 

[rbattle]

You could have it pull from a strainer into a tube, just like a canister filter, and then pump back into the tank, either with or without a SCWD. That would be you best, IMO. Hope this helps.

Rush

 

[Anonymous]

You could have it pull from a strainer into a tube, just like a canister filter, and then pump back into the tank, either with or without a SCWD. That would be you best, IMO. Hope this helps.

Rush

SCWD? Not sure what that means.

Should I use PVC to do this or is it best to use hoses? I want to minimize any accidents.

Thanks for the response.

Ace

 

[Anonymous]

You could build an over the top closed loop. Put a spraybar or a largert manifold on the return side, could even play with some kind of eductor and you would get some nice flow. Here is a pic of a closed loop - over tank set up a guy up in dallas put together using a SQWD:


http://www.sparklingfloorservice.com/ta ... dloop.html

HTH

 

[Anonymous]

You could build an over the top closed loop. Put a spraybar or a largert manifold on the return side, could even play with some kind of eductor and you would get some nice flow. Here is a pic of a closed loop - over tank set up a guy up in dallas put together using a SQWD:


http://www.sparklingfloorservice.com/ta ... dloop.html

HTH

It does. Thanks!