Below is two images of my final tank design. I start putting it together this weekend and would like any comments. I have been designing it while waiting to purchase it for 6 months. The tank will be a 40 gallon breeder with custom filtration and refugium in the back. I will be primarily keeping sps corals. Water will overflow from the tank into a berlin sock, and then into the sump, then be pumped into the refugium, and finally it will overflow back into the tank. Main pump will be a MJ-900 and two MJ-900 as circulation pumps, alternating back and forth on a wave maker.
Lighting will be 2 - 250 watt metal halides and 2 - 65 watt 50/50 PC. It will also have moonlights run by the neptune controller. Final tank volume will be 32 gallons, sump 3.4 gallons, and 3.4 gallon refugium.
Auto-top off for evaporation.
Auto-water change. The tank will change 0.75 gallons of water everyday. This will be done by shutting down the main pump, letting the sump fill up and then drain 0.75 gallons of water, then when the pump starts back up it will top-off 0.75 gallons of make-up saltwater.
I would like to thank all the reefs.org members for all the help answering my questions. I will be posting many pictures as the tank comes together. It is getting really exciting!!!!!!!
Lighting will be 2 - 250 watt metal halides and 2 - 65 watt 50/50 PC. It will also have moonlights run by the neptune controller. Final tank volume will be 32 gallons, sump 3.4 gallons, and 3.4 gallon refugium.
Auto-top off for evaporation.
Auto-water change. The tank will change 0.75 gallons of water everyday. This will be done by shutting down the main pump, letting the sump fill up and then drain 0.75 gallons of water, then when the pump starts back up it will top-off 0.75 gallons of make-up saltwater.
I would like to thank all the reefs.org members for all the help answering my questions. I will be posting many pictures as the tank comes together. It is getting really exciting!!!!!!!



