I don't know if that is possible but thought I would ask
I have a 30 gal with the following:
2 * MJ1200 * 295 gph = 590
1 * MJ600 * 160 gph = 160
1 * Seio 620 * 620 gph = 620
Total = 1370 gph.
1370 / ~27 gal of water = 50X turnover.
I have it setup as follows.
1 MJ1200 back left corner pointing down across the back.
1 MJ600 beside the MJ1200 in back left pointing to the front glass 3 inch below surface.
1 MJ1200 back right corner pointing up for surface agitation towards glass at the centre of the tank.
1 Seio 620 centered on the right glass facing across the centre of the tank.
It is mainly an SPS tank.
Thanks for you input.
I have a 30 gal with the following:
2 * MJ1200 * 295 gph = 590
1 * MJ600 * 160 gph = 160
1 * Seio 620 * 620 gph = 620
Total = 1370 gph.
1370 / ~27 gal of water = 50X turnover.
I have it setup as follows.
1 MJ1200 back left corner pointing down across the back.
1 MJ600 beside the MJ1200 in back left pointing to the front glass 3 inch below surface.
1 MJ1200 back right corner pointing up for surface agitation towards glass at the centre of the tank.
1 Seio 620 centered on the right glass facing across the centre of the tank.
It is mainly an SPS tank.
Thanks for you input.



