Loc Line and Bulheads

[Mikef1]

I am currently replumbing my 90 gal with new bulkheads which are 3/4inch and 1inch bulkheads going into a AGA megaflow kit. My question is are these Slipxslip bulheads? This is what they appear to be to me, I want them to only be threaded on the outside so I can slip the pipes into them. Also what is the best place online to get these parts and loc line as well? Do you actually need that special tool for the lockline or not? Thanks

 

[Anonymous]

You don't need to tool to put them together, but the selection of LocLine is very limited. Good luck, and take a look at marinedepot and www.locline.com (IIRC)

 

[Anonymous]

No you don't need the special tool for locline. Just need some strength. The bulkheads that come in the megaflow kits are slip x slip. All bulkheads are threaded on the outside otherwise how would one attach the nut?

HTH

 

[Mikef1]

I know there all threaded on the outside I just wanted to make sure the people reading my post would know that I didnt want it threaded on the inside.

 

[Anonymous]

I know you know. But did you know I know you know? lol

 

[Mikef1]

Thanks guys, I ordered everything I needed from marine depot.