I'm still trying to dial in my Calcium Reactor - Korallin 1502. I ended up getting a lid with a ph probe port. The pH inside of reactor is pH controlled between 6.7 and 6.9. I've measured the effluent once and stopped - DKH of 25+ (didn't want to waste my Elos test kit). Tank pH is 8.2-3 during the day and 7.9-8.0 at night.
Somewhere around 10-12 bubbles a minute and 60-70 drips a second of effluent.
Still, with the pH of the reactor dialled in I don't quite understand the low DKH. I did use Randy's 2 part to get things somewhat balenced.
Some other parameters -
SG 1.026
Mg 1275
Ca 400
Kh 8-9 (yesterday same time)
Kh 7 (Today same time)
Corals
Hodags Monti (1")
Candy cane (2")
Lobo Hemprichii (4")
German blue Acro ( 2-3")
Any ideas, or things I can check? First time dialling this in...
Somewhere around 10-12 bubbles a minute and 60-70 drips a second of effluent.
Still, with the pH of the reactor dialled in I don't quite understand the low DKH. I did use Randy's 2 part to get things somewhat balenced.
Some other parameters -
SG 1.026
Mg 1275
Ca 400
Kh 8-9 (yesterday same time)
Kh 7 (Today same time)
Corals
Hodags Monti (1")
Candy cane (2")
Lobo Hemprichii (4")
German blue Acro ( 2-3")
Any ideas, or things I can check? First time dialling this in...



