Eheim 1250 Dimensions

[kimoyo]

Anyone know the exact dimensions of an eheim 1250?

Is it possible to take the foot support off?

And what are the dimensions without the wider foot support on the bottom. Thanks!!

 

[Mak]

1250 Hobby Pump
320 gph with a max head of 6.5 feet at 28 watts. Input 16/22 mm, output 12/16 mm.

 

[Deanos]

Its listed in mm

Eheim pumps

 

[kimoyo]

Mak - Thanks but I meant the l*w*h

Deanos- Thanks but I really limited on space because of a mistake I made when making my tank. I have a under 3.75" for the width of the pump. So I'm wondering if those are exact and if I can cut off the foot support how much more I can get. I don't want to buy the pump just to see.

 

[Dace]

Mak - Thanks but I meant the l*w*h

Deanos- Thanks but I really limited on space because of a mistake I made when making my tank. I have a under 3.75" for the width of the pump. So I'm wondering if those are exact and if I can cut off the foot support how much more I can get. I don't want to buy the pump just to see.

I will be ordering one today for my setup. if you don't get the measurement by then i'll let you know

 

[Deanos]

I have a under 3.75" for the width of the pump. So I'm wondering if those are exact and if I can cut off the foot support how much more I can get.

96mm seems pretty exact to me, which is bigger than you have available. How would cutting the foot support give you more room?

 

[fritz]

I have one at home I can measure later.

 

[kimoyo]

Dave - Thanks.

Deanos - I found out the foot support is actually removable which is good. I'm hoping that the 3.8" width is with the foot support which looks to add about 1/2". Then without the foot support the pump should fit.

Fritz - Thanks.

 

[Deanos]

:idea: Ah...you mean that plate it sits on! I wonder if Eheim calculated that into their measurements since it is an option whether or not to use it.