Remora/Pump help

[Mr.First]

I am running a Remora Skimmer. It is old and I dont have the model #. It is in a new (4 weeks) 30 gallon frag tank. Currently running with a Maxijet1200.
Is that pump stong enough, or should I look for something stronger?
If so, what.
Not drawing much foam, I know it is a new tank, Fighting initial algea currently now so it is drawing a bit. Wanted to hear from experience.

 

[yeahcheetah]

That's standard combination. Give them a good cleaning may improve skimming a little. Check the position of that white screw also, try to place it at the best position.

 

[alfani]

fine for a frag tank, give it a good scrub in the arms inside and out

might be blockage from dried coraline

 

[NYreefNoob]

run it in vinegar for a few hours then rinse real well, there's a screw in the skimmer take it out { becareful } and clean that hole out, mj1200 is fine, what i am using on mine and i am getting really dark skimate and takes about a week to fill up

 

[Mr.First]

Thanks ,,,,,,,,
Wsa thinkin about getting a bigger pump, no reason to..
Appreciate your responses