• Why not take a moment to introduce yourself to our members?

dsgray16

Advanced Reefer
Rating - 100%
37   0   0
I got my Aqua Controler jr in.. I have it all pugged in etc, and i think i have the base unit programed the way i want it. I feel like maybe i am missing something, but is there an easy way to know what functions are assosiated with what sockets of the DC-8??

Other issue I am having is that the temp is set to fahrenheitbut is readig 22.6 degrees...

Any tips or trips with this unit would be great!
 

KathyC

Moderator
Location
Barnum Island
Rating - 100%
200   0   0
YOU can change any of the pre-programmed functions to what you want them to be. You can change them to any order. Best to fully program the unit before you attach it. It takes a little getting used to as the insteuction booklet is less than informational...lol
It seems you need to reset it to fahrenheit, that 22.6 would be a celsius reading.

Best clue I can give you is when you are looking at the DC8 and you have it oriented so that the first receptacle (with the '15' next to it) is the top row and the '15' would be to the left) - THAT would be the first item you are programming. It goes across and then drops down to the next row again starting form the left of the unit.
Hope that makes sense. :)
 

KathyC

Moderator
Location
Barnum Island
Rating - 100%
200   0   0
Yeah i can work with that.

I tried reseting the temp prob.. its def set to F

Ok, then increase the temperature on the unit. Might want to check that it is correct first in water other than your tank though!
When programming the temp you DO want to tell it to come on at x temp and ALSO that you want it to shut OFF at X temp so it can't overheat the tank.
 

Sponsor Reefs

We're a FREE website, and we exist because of hobbyists like YOU who help us run this community.

Click here to sponsor $10:


Top