D1J8Z Advanced Reefer Location oceanside, NY Rating - 100% 74 0 0 Oct 4, 2009 #1 When I plug it in it does not work normally smacking the front or poking at the propeller works but not anymore. Can anyone help me fix it?
When I plug it in it does not work normally smacking the front or poking at the propeller works but not anymore. Can anyone help me fix it?
B bruma bull Advanced Reefer Location bronx Rating - 100% 34 0 0 Oct 4, 2009 #2 mag take off the nozzels 4 screws pull out the impeller and clean it in the well and the impeller, then put back together
mag take off the nozzels 4 screws pull out the impeller and clean it in the well and the impeller, then put back together
MIKE NY Two Decade Club Manhattan Reefs Location Franklin Square, NY Rating - 100% 204 0 0 Oct 5, 2009 #3 I clean all my pumps with hot water and vingar using an old toothbrush.....
cali_reef Fish and Coral Killer Location On the waste coast, again. Rating - 97.3% 36 1 0 Oct 5, 2009 #4 Acid bath and a bottle brush, you may have to find new bushings if yours are worn. Get new screws for the housing if the old ones are rusted.
Acid bath and a bottle brush, you may have to find new bushings if yours are worn. Get new screws for the housing if the old ones are rusted.