Small problem with AquaC Remora prefilter box

[richardhmc]

Hey all I use a prefilter box for my hang on back AquaC Remora. The problem is however is that the right side is always tilting down while the left side is up.
I consider this a major flaw of the prefilter box that the only thing holding it in place is two screws screwed into the side of the pump. Any ideas on how to keep this thing water level straight? Because the left side is where the water goes in, and since it tilts, the water doesn't go through the teeth. Anyone else have had this problem? Thanks!

Here is a picture trying to describe my prefilter box.. I was never meant to be an artist sorry lol

 

[Awibrandy]

Don't really know, but I'd put something heavy in that side to make it go down.

 

[richardhmc]

I've added small pieces of live rock in the other side but I think that prevents a good flow into the intake area... also, since the output from the skimmer comes out as a waterfall into the right side, the water itself pushes the right side down as well and the live rock didn't help

 

[Awibrandy]

Something heavier then. Or support the other side with lr. The should level it off.

Can't you tighten the screws to prevent it from sliding?

 

[richardhmc]

I have tighten them all the way... the reason why it tilts is also because the pump is connected to the skimmer by a flexible piece of tubing so I am assuming over time the tube bent in the direction of the pressure. I was just thinking about completely taking it off since that would give more space and whatever but the prefilter box helps with taking off the top layer of scum

 

[tonyyammine]

that thing sucks i got rid of mine i been happy ever since

 

[richardhmc]

But when you got rid of it, have you seen a decrease in skimmer efficiency/output?

 

[Jpergamo]

I actually remember drilling a small hole in the other side of mine back in the day and adding a suction cup from one of my heaters to it to hold it straight to the glass. could give that a try.

 

[m'akoyPINOY]

mine's leveled perfect.just make sure to put the sponge side on the side of the tank.if you're in the city and would love to see it,you're welcome to check on it!

 

[Mr.First]

I had the same exact problem with mine. Ended up taking the thing off as well.

 

[richardhmc]

Good to hear that i'm not the only one with this problem haha!

m'akoypinoy- so you mean you propped it against the side of the tank?

to those who took it off, did you see a decrease in output? Also, didn't any fish or anything get stuck in the pump?