- Location
- White Plains
Your CA is a little high, you should only dose calcium or anything else when needed.
Correct. You only dose whats needed, its called 2 part but you don't have to add what you don't need.so i can only dose the ALK liquid and not CA right?? i was thinking since its a two part soultion you have to use both but i guess you dont have to if you dont need to thanks...
dude u gotta read. Ca & Alk should be dosed equally, If your having a prob make correctiion for that prob. Looks like your in zone 4 read the linked article to understand.
http://web.archive.org/web/20021127040526/http://www.advancedaquarist.com/issues/nov2002/chem.htm
dose what you need. i do it all the time. use this calculator to know how much to add its very accurate..
http://reef.diesyst.com/chemcalc/chemcalc.html
He should not dose. Its recommended to increase Alk based on his pH. I basically had the same prob, made correction slowly using baking soda over a weeks period. My Alk is now within acceptable limits. Make changes slowly not to shock your tank.
The dosing of ca and alk in improper balances lead to these types of probs. With balanced dosing you should never end up in this positions.
Hey everyone I started dosing 2 part b-ionic for my alkalinity but I don't know if I should keep dosing calcium but to my understanding you have to dose both right or wrong?? These are my test readings KH-6.1 /
CA-490 / MG-1410
Harry, Richie is saying that he's currently out of balance. Therefore, in order for him to slowly correct this imbalance he has to dose either Ca, Alk, or Mg out of balance to bring it back in line.
He must test first, then dose the element that is running light in his system. Wait a few hours and then test again.
If he were to follow your instructions he would wind up proverbially chasing his own tail and get either nowhere, or further out of balance.
Russ
Is there a such thing as to much CA? If so what can happen?
Sent from my iPhone using Reefs