night time mode for vortech?

[jetthril]

Not sure how it will work with your wireless system, but if your controller goes into night mode, I don't see why the two pumps wouldn't be equally affected. Let me know how it works out for you.

Oh one more thing, if the electricity supply ever cuts out on your Vortech, you are gonna have to reset the night time mode again.

 

[ryangrieder]

Oh one more thing, if the electricity supply ever cuts out on your Vortech, you are gonna have to reset the night time mode again.

I won the vortech battery back up :wink: lol

 

[greengny]

Ryan,

Not to h/j your thread...but.... are you using the rubber spacer that came with your MP10 (on the dry side)? Just curious as I'm adding 2 MP10's to my 65g.

Thanks

 

[smoq]

Ryan,

Not to h/j your thread...but.... are you using the rubber spacer that came with your MP10 (on the dry side)? Just curious as I'm adding 2 MP10's to my 65g.

Thanks

There's no need to use them unless you have a very thin glass, 1/8"-3/16" I believe

 

[Tranquil201]

My glass is 1/2 inch. I put them on just to minimize as much noise as possible. Less vibration on the glass the better I feel.

 

[ryangrieder]

My glass is 1/2 inch. I put them on just to minimize as much noise as possible. Less vibration on the glass the better I feel.

half inch deffinetly does not need the spacers. honestly, i would think with the spacer, that that is too spaced out for an MP10. i dont know what the magnet is rated up to but that seems like your at max limit...