Having trouble with settings for ai sol blue
- Thread starter BFITZ06
- Start date
- Location
- Bergen County, NJ
You are using the AI controller??
How many timers are you using> I think that there are 14 on the controller. Make sure that only the ones that you are using are ON.
also I found the hard way, that you cannot turn any of the led channels to "--" they need to be "00". The timers will carry through some of the settings from timer to timer.
How many timers are you using> I think that there are 14 on the controller. Make sure that only the ones that you are using are ON.
also I found the hard way, that you cannot turn any of the led channels to "--" they need to be "00". The timers will carry through some of the settings from timer to timer.
- Location
- Bergen County, NJ
Just turn the ones you dont want off, not to 00
Cool thanks! I love the light but rails from ai suck got to hang it up much higher i didnt think they would be high enough before i got them but figured i would give them i shot. I got it set for 30% white 40 %b-rb at noon. Going to keep an eye on the corals and see how they do.
Sent from my DROID3 using Reefs
Sent from my DROID3 using Reefs
- Location
- Bergen County, NJ
I actually forget what I have mine set at. I may turn mine up a bit more. I did custom mount for my lights.
- Location
- Miami
I would do a reset on the controller and start all over again.
- Location
- Miami
I have mines on some custom brackets for a real clean look
- Location
- Miami
Kenconnect
- Location
- Miami
Thanks pm if ur looking for some thing like that I can connect u to the person who made them for me.
- Location
- Miami
kool good luck
Sponsor Reefs
We're a FREE website, and we exist because of hobbyists like YOU who help us run this community.
Click here to sponsor $10:
