WTB: Good skimmer with a small footprint, and fit in a 10 gallon sump

[JLAudio]

Im looking for a good skimmer for 54 corner, but I have very little room to work with. The biggest sump I can fit is 20" x 10" so I need a good skimmer that can fit in there along w/ my return pump and a small pump for phos reactor.

If you have a skimmer for sale that fits these requirements hit me up, thanks

 

[House of Laughter]

JL, take a look at the BPS-3c - NIB, not used.

House

 

[cono]

look on ebay for a lifereef skimmer i have on and it works the best over any other skimmer and Jeff at lifereef builds the best in the industry .

www.lifereef.com

 

[JLAudio]

Thanks House and Cono, Im gonna look into those.

House that bermuda might be a bit tall, being the fact I only have 24" and unless it has the special type of cup removal, I wont be able to take the top off. And unfourtanetly Id rather spend in the $200 range so used is probably more feasable

 

[DaddyReefer13]

I have an Aqua C Urchin Pro with a Mag-5, LMK if you are interested.

 

[DevIouS]

EuroReef

 

[fritz]

DAS skimmers

 

[midtownman]

i got a 54 corner too i just got a turboflotor multi 1000 its rated for 250 gal i'll let you know how it works

 

[JLAudio]

DAS skimmers

Fritz I just sold a DAS and I believe even a das ex 1 is too tall for a 24" high cabinet

 

[RARECLOWNSNJ]

I got a aqua c remora nano

It will def fit but its got some blemishes. i bought it for 90 from someone on here.

 

[House of Laughter]

BA only need 23" total - getting the cup off with 24" would be a problem.

Super limited here - what about a hand on back?

House

 

[JLAudio]

BA only need 23" total - getting the cup off with 24" would be a problem.

Super limited here - what about a hand on back?

House

Already ruled that out because my corner sits flush in the corner

 

[JLAudio]

It will def fit but its got some blemishes. i bought it for 90 from someone on here.

Im sure it will fit but I want something more powerful so I can have a decent bioload, but thanks

 

[House of Laughter]

Hang it on the sump! :biggrin:

House

Already ruled that out because my corner sits flush in the corner

 

[JLAudio]

I will do some measurements and see how much room I will get if I do it like that

 

[JLAudio]

http://www.aquacave.com/detail.aspx?ID=1298

I was suggested this ASM g-1 skimmer. Its supposedly pretty good and at 8.5X10 and 18" height. I should be ok in my 10" X 20" sump along with a rio 1700 return, heater and a small rio for my phos reactor. Im going to go fugeless, so That will pretty much be the occupany of the sump

Any thoughts?

 

[JLAudio]

Anyone out there got a ASM G1 skimmer or another good skimmer (rated for over 100) with a small footprint and could fit in a 10 gallon sump

 

[ZZROCOOL]

skimmer

JL I have an ELOS skimmer that i used on my 54 corner !! its brand new used for a few days wile i switched over to my new tank!

 

[JLAudio]

:bump:

 

[Sean]

ASM
$120 -ASM G-Mini Protein Skimmer
$237 -ASM G-1 Protein Skimmer
$257 -ASM G-1x Protein Skimmer
$273 -ASM G-2 Protein Skimmer
$309 -ASM G-3 Protein Skimmer
$405 -ASM G-4 Protein Skimmer
$426 -ASM G-4 plus Protein Skimmer
$437 -ASM G-4x Protein Skimmer
$573 -ASM G-5 Protein Skimmer
$727 -ASM G-6 Protein Skimmer

for more details
http://www.manhattanreefs.com/forum/aquatic-creations/35263-drop-ship-dry-goods.html

frag swap special
http://www.manhattanreefs.com/forum/aquatic-creations/36346-frag-swap-sale.html