biopellet ?

[batt600]

So basically you're saying that he would get a bacterial bloom if nitrates are high (which happens because the current bacteria population is not adequate to handle the high nutrient level of the system). I'm not sure if you were disagreeing but this is what was said before. Btw, carbon Naka bacteria.

Yes with the pellets if your no3 are high it will raise it a little till the pellets work in thats why you should start with a low dosage of pellets first

 

[charliethetuna88]

I thought I did the right dose I'm eventually gonna use the full 1000 mls so I started with half. 500 mls .do u think I will need to use 1000 mls for my tank I have 200 gallons of water or stick with the. 500

 

[batt600]

I thought I did the right dose I'm eventually gonna use the full 1000 mls so I started with half. 500 mls .do u think I will need to use 1000 mls for my tank I have 200 gallons of water or stick with the. 500

What brand pellet are you using

 

[charliethetuna88]

Npx I think

 

[batt600]

the npx pellets are 550ml per 75 Gallons you will need 2 more 550ml bags

 

[charliethetuna88]

I have a total of 2 bags right now one in and one ready to go do u think I will need the 3rd bag also. And batt I'm running one bag per 150 phosban reactor there pleanty of room left but my question is can can split them ?rightor do I have to run all in 1 reactor I was planning on running them in 2 seperate reactors with 2 seperate pumps I have another 150 reactor which I was gonna hook up when ready for the other 550mls of pellets

 

[batt600]

yes you can

 

[charliethetuna88]

Cool do u think I need the 3rd bag