Bulkhead wrench

[Fishluva513]

For 1 inch bulkhead the 1 included with my overplow kit is plastic(cheapo company). Not strong enuff to fully tighten it. I cant get under there with a big wrench. Hopefully some1 in the area got 1 for sale or to lend out thanks guys

 

[Fishluva513]

Overflow

 

[NYreefNoob]

shouldnt need any more tightening then you can do with your hand

 

[bigdog1428]

Honestly i did mine hand and was fine


Sent from my iPhone using Reefs

 

[reefoman]

Honestly i did mine hand and was fine


Sent from my iPhone using Reefs

+1


Sent from my iPhone using Reefs

 

[125reefer]

honestly i did mine hand and was fine


sent from my iphone using reefs

+2

 

[fishman1069]

+3 If you use a wrench and go to tight you run the risk of splitting the gasket.

 

[Fishluva513]

I need it 1 centimeter tighter. Its got a slow slow slow leak that im seeing a salt build up.

 

[motortrendz]

i had the problem where mine were leaking when i only tightened them by hand, it drove me nuts.. it didnt matter how tight i made them, including using a wrench and silicone..lol but when i replaced them and made sure the glass was spotless when i tightened it by hand it was good... maybe your bulkhead isnt any good or the seal is upside down, or there is stugg on the glass preventing the seal.

 

[Fishluva513]

I feel like its just cheap (deep blue 75rimless). Im about to go buy a mega flow kit