Recent content by ap7141

The 1 inch pipes were put there just for the photo....a local plastic company is making me 1-1/2 " inch u tubes just waiting for them to finish them.......its not the size of the pipe really, the real determining factor is how far down the water falls from the top of the tank..most overflows are...

Just clamp a piece of acrylic to a bench and leave the length you want to bend overhanging...heat the edge of where the bend is going to be with a small propane torch or arts and crafts heat gun and apply steady pressure in a few minutes the piece will bend...hold in position and pour cool water...

Photo <duplicated photos deleted by seven ephors>

Last Photo

24 " Linear inches of overflow.....Dual 1-1/2 " Inch Durso Standpipes..........30 $ and 3 hours of your time

more!!!

Here are the pics.......Enjoy

Alls i did was clean the two side that were going together, placed the tanks on the stand, butt them together and then siliconed the front top and back seam so no dirt could get in between them....it IS noticable that they are two seperate tanks but they are just Mounted in the wall as if they...

Alls i did was clean the two side that were going together, placed the tanks on the stand, butt them together and then siliconed the front top and back seam so no dirt could get in between them....it IS noticable that they are two seperate tanks but they are just Mounted in the wall as if they...

29 gal. bowfront, Aquaspacelight 150 watt AB 10K MH, 20 watt no actinic, Turboflotor 1000, 150 watt visitherm, Ecosystem refugium mounted for gravity return with Cool Works ice probe chiller mounted inside, 2 Maxijet 1200's, 8 watt u.v run by Eheim 2013, 5 gal. auto topoff via AutoTopOff.com's...

120 gal. Custom Reef tank with 65 gal. custom sump, center overflow box, dual 1 1/2 " i.d clear pvc Durso standpipes, 4- 1" return outlets, powered by 2 BlueLine 55's (1100gph) one for each side of the tank, EuroReef CS8-3 external skimmer, MRC 1 calcium reactor controlled by Milwaukee cont...