Reef/Fowlr new set up in progress

[ap7141]

120 gal. Custom Reef tank with 65 gal. custom sump, center overflow box, dual 1 1/2 " i.d clear pvc Durso standpipes, 4- 1" return outlets, powered by 2 BlueLine 55's (1100gph) one for each side of the tank, EuroReef CS8-3 external skimmer, MRC 1 calcium reactor controlled by Milwaukee cont., CoolTouchlights 4' dual 175 watt 10K Ushio MH and quad 110 watt VHO Uri actinic, sump has dual CSL 65 watt PC smartlights(50/50), Hanna pH monitor, Pinpoint salinity monitor, 1/4 hp Pacific Coast chiller and 500 watt Gen-X titanium heater controlled by 3 digit dual stage Medusa cont., 18 watt Smart U.V. , ro/di auto top off from 10 gal. storage container via Life Reefs electronic float switch /////adjoining tank is 65 gal. Custom built Tank with 20 gal. sump, Self tweaked Amiracle external overflow, Turboflotor 1000 skimmer, Dolphin DP-560 return pump plumbed to two outlets in the tank, 12 watt Smart U.V. powered by Eheim 2013, Eheim 2227 wet/dry, 150 watt heater, Aquaspacelight 150 watt 10K A.B. MH with 40 watt no actinic, auto top off from 10 gal. storage container via Life reefs electronic float switch, storage container is same for reef tank and is itself auto topped off via Life Reefs ro/di solenoid, 10 gal. Prop/qt tank, 65 watt CSL PC 50/50 & JBJ 65 watt PC, maxijet 1200, 75 watt visitherm, Ecosystem refugium plumbed for gravity feed, Cool Works Ice probe chiller, both tanks are mounted in the wall to look as if they are one tank, the fish room behind has a thermostat controlled exhaust fan.........enjoy the pictures

 

[Shinken]

Just curious, if you are going to make the two tanks look like one then how are you going to cover the join?

Setup looks well thought through 8)

 

[ap7141]

Alls i did was clean the two side that were going together, placed the tanks on the stand, butt them together and then siliconed the front top and back seam so no dirt could get in between them....it IS noticable that they are two seperate tanks but they are just Mounted in the wall as if they were one piece.....it really just looks like two viewing panes on one large tank....were you not able to see how it looks in the photos???

 

[ap7141]

Alls i did was clean the two side that were going together, placed the tanks on the stand, butt them together and then siliconed the front top and back seam so no dirt could get in between them....it IS noticable that they are two seperate tanks but they are just Mounted in the wall as if they were one piece.....it really just looks like two viewing panes on one large tank....were you not able to see how it looks in the photos???