Recent content by AquaFxIrene

I'm work with Aqua FX,and I saw that you had a problem. I'm just curious if you ever found out why your phosphates were not being rejected. Did you ever verify the operating ranges of your phosphate test kit? If test kit is in operating ranges, what did your TDS read at with your feed water...

I totally agree with THillson. Contact time is essential when running water thru DI . Don't change the feed pressure to the RO, the higher the better. We have bulk DI resin available if your looking for it. www.aquariumwaterfilters.com

Yes, the fast trick is which line produces more flow. That would be the waste line. The other way to varify is there is a flow restictor in the waste line. Most of the time the flow restictor is a thread like insert. The best way to tell is the TDS reading. They will be so much higher in...

Do not worry too much, After you add your RO/DI water the algae will lose it's nutrient source and it will die out! You will be OK! If you have any more trouble let me know!

Hello All, I asked our engineer, no one here has ever heard of rubbermaid membranes, but if they fit in your housing they will probably work. The only problem I can see is the flow restrictor, It has to match the GPD rating of the membrane. I imagine rubbermaid has just private labeled the...

I am not exactly sure what you mean, so be patient. Are you saying that all the water goes into you 55 gallon holding tank, and when that happens there is an shut off that feeds make up water to your tank? If so, you should not put anything to obstruct the pressure leaving your RO system. The...