Recent content by cavediver

I also missplaced my booklet. I e-mailed Red Sea, and they sent me a .pdf file the next day. I've since erased the pdf, or I'd sent it to you! Check out their website and ask them. www.redseafish.com Good Luck, John

My green Carpet, who went back to the LFS to find a fosterhome yesterday, used to "love" the fish I had in my tank. To a 6-8"carpet, I lost, over the course of 2yrs ; 2 sailfin tangs 2 yellow tangs 2 gobys (well maybe this was my fault, opps) 1 Blue Damsel 1 3 stripe Damsel Many Turbo's Asst...

Used a black garbage bag, cut the edges off and stapled it to the back of my canopy. Plastic, nice texture, easly to install after the 180G was filled and setup (opps) and very light. JOhn

Lynski, What model is your Berlin. I have a Classic and could walk you through it if it would help you out? John

Hi guys, Sorry for the delay in replying, vaccations are tough you know!! When I left I drained 1/3 of the tanks water to relieve the stress on the cross braces. I didn't lose anylivestock over the week. :D I picked up the new top today and had some help from the LFS to replace it. They...

Thanks The top frame is all one piece of moulded plastic, which if removed would look like 3 black rectangles, connected side by side. Unfortunatly they are not. It's difficult to tell from the picture, I've croped it and added a red line to show where the crack is and the resulting bowing.

Anyone know how to edit out one of those pictures?? You can see on the left hand side of the closest brace, it's separating right where the canopy rests on the black plastic trim, right where the cross brace is pulling away. This picture was taken last week, and the cracking is now 1/4" wide...

Ah HAAA I remember borowing the D-Camera from work and snapping off some pictures last week. I checked the CD and I have a sutable picture for you guys to see.....

Yep, both cross pieces that are moulded to the trim have broke. I've removed 1/3 of the water to a rubbermaid holding tank and the gap between the braces has closed up. Sudgesting that the bowing of the glass is reduced due to the lower pressure from the shallower water. "A picture is worth a...

Steve, These two cross bars that I have are 3" wide each. They are made/moulded into the same piece of plastric trim that circles the top perimeter of the tank. I wish I could. I don't have a digital camera yet, but I'm thinking about it!! Andy, My LFS (where I bought the tank) is...

The tank manufacturer is Miracle.

No my tank has no glass braces on the top......Soon, within the next few hours, its gonna have a couple of bar clamps and hockey sticks( to spread the pressure of the clamps) untill I get back from vacation!!

Maybe it isn't structural?? It does wrap the top edges of the glass tank, I think it's purpose is to prevent the 4 ouside glass panels from separating when the weight of the water is pushing out on them. If your tank is fuctioning well without them (what size?) then maybe I don't have to worry...

Well, today started out fine. I’m on holidays!! I’ve got the week off and I’m going away camping Tuesday, and planning an being back Friday….Or so I thought anyways… I slept in this morning, till about 10:00am, gotta love holidays. Woke up and checked out my new tank. Went through my mental...

Thanks for your help guys!! John