Nozzles

[Ace23*15*]

i have a 24g A.P. system running and i'm tryin to add a nozzle for better circulation around the tank...not sure the exact measurements to put one on..so some help choosing one would be really really appreciated...thanks

link below for nozzle selection

http://www.drsfostersmith.com/produ...&Ntx=mode+matchallpartial&Np=1&pc=1&N=0&Nty=1

 

[TimberTDI]

The size I used was the the 1/2", so my list of parts was this:

A Bulkhead fitting, Double Threaded (1/2")

...you wil need to drill a 1 1/8" hole for the bulkhead. For this I justed used a boring bit.

MPT x 90? Elbow Insert (1/2" x 1/2")
K. MPT Connector (1/2")
L. Y Fitting (1/2")
G. Ball Socket Tubing;1/2" (6") (x2)
J. 1-1/4" Flare Nozzle (1/2") (x2)

I got this idea from one of the members at nanoreef.

Eventually I will get my tank thread up. Also I use the Hydor Flo on the return (with a maxi 900 for the return). I added the locline on another maxi 900.

Steven

 

[TimberTDI]

Mine is setup like this but with loclines on the opposite side, next to the return. I had to do it this way because of the Sapphire skimmer in the other chamber.

 

[Ace23*15*]

do you by anychance know the measurements of the tube from where the hydro flow is connected because i'd also like to but a nozzle there