Well Chris here is the skinny on my tank. I am using in a closed loop a Dolphin 3000 Ampmaster. For my sump return I am using anothe Dolphin 2100. The lighting is in a custom canopy it is running two 36" blue actinics rated for 40 watts. Also two 250 watt MH Iwaski 10,000 K bulbs with Icecap ballasts. You had asked what my setup was because you were concerned aboout my filtration pumps adding heat.
The summers here in Seattle are very mild. Very rarely do we hit 90 degrees and although we have no air con we are shaded by a wooded lot and the internal temps in the home never really peak over 85 deg. It can get humid as we are 15 miles from the Pacific and 4 miles fromLake Washington. The MH lights are approx 8 inches above the tank.
I am just wondering if I could save 600 bucks and not add a chiller. I would like to hear from folks that do not use a chiller. And that have tanks based on all critter types. SPS,LPS and so forth.
The money I save on the chiller would be better spent on a Calc reactor or Kalwasser dosing pumps. So thats where I am at.
The summers here in Seattle are very mild. Very rarely do we hit 90 degrees and although we have no air con we are shaded by a wooded lot and the internal temps in the home never really peak over 85 deg. It can get humid as we are 15 miles from the Pacific and 4 miles fromLake Washington. The MH lights are approx 8 inches above the tank.
I am just wondering if I could save 600 bucks and not add a chiller. I would like to hear from folks that do not use a chiller. And that have tanks based on all critter types. SPS,LPS and so forth.
The money I save on the chiller would be better spent on a Calc reactor or Kalwasser dosing pumps. So thats where I am at.



