• Why not take a moment to introduce yourself to our members?

Deep Dive Coral

Advanced Reefer
Rating - 100%
46   0   0
hey guys i set up my calcium reactor yesterday and it slowly was raising my calcium and alk. last night everything was good and i then checked it again this morning and my alk was through the roof.... but the calcium was higher. what can i do i turned off the reactor now. i am in the process of doing a water change like 20g on a 100g tank. can someone help me out as to why or what i did wrong? maybe too fast of a flow through the reactor? to slow? all help is warented......
 

Deep Dive Coral

Advanced Reefer
Rating - 100%
46   0   0
i was told to keep effluent at 6.5 to start.... so it should drip into the tank? mine streams. how do i get it drip. my CA reactor didnt come with a PH probe holder so i had to make one on the out side..
 

NYreefNoob

Skimmer Freak
Location
poughquag, ny
Rating - 99.4%
168   1   0
no you need to have a effluent cup that the ph probe from the controller sits in this will monitor the ph output from your reactor, it will drip from cup into tank
 

regal

Advanced Reefer
Location
New Rochelle
Rating - 100%
28   0   0
Does the effluent/output of the reactor have a valve to control the flow? How do you feed the reactor with the tank's water, with a power head or gravity fed? Your levels are high probably because the effluent/flow rate of your reactor is too high.
 

NYreefNoob

Skimmer Freak
Location
poughquag, ny
Rating - 99.4%
168   1   0
cal

here is mine, i have a small feed pump in my sump to feed the reactor, then the outlet goes into a plastic cup i drilled a hole half way up in it with lets the effluent drip into the tank, yes mine has a knob to control output, ph probe frm controller sits in the effluent cup also, this i what regulates the reactor measuring the effluent from the reactor
 

Attachments

  • christmas 08' 106.jpg
    christmas 08' 106.jpg
    88.5 KB · Views: 138
  • christmas 08' 096.jpg
    christmas 08' 096.jpg
    78.3 KB · Views: 134

duke62

Advanced Reefer
Rating - 100%
224   0   0
with the type of salt i use in my 50 gal with 30 gal water volume in sump i dont even use my ionic calcium just the alk.my calcium is always between 490 and 470.i have 2 clams some sps and for some reason i never need it.i have had the same 2 part for over 6 mths and i dont see myself buying anymore for at least 3 months.
 

NYreefNoob

Skimmer Freak
Location
poughquag, ny
Rating - 99.4%
168   1   0
trust me i dosed for the last 2 yr's, and have had heavy stocked sps tanks no bigger then 62g, this will be a less expensive total cost for 2 yr's as compared to esv dosing, keeping cal 450, dkh 9 mag 1300
 

Deep Dive Coral

Advanced Reefer
Rating - 100%
46   0   0
thats pritty much how i have my effluent cup as well.. as for the drip rate i now have it at about 1 bubble every 3 seconds for now.... will up in in a couple of days to one bubble every 2 seconds and then 1 every second. but slow is better and i messed up i also have a pritty high flow rate going through it becuase im trying to lower the alk level. im following this way http://www.melevsreef.com/calcium_reactor.html

tell me if this is the wrong way to do it. right now my ph in the reactor is 7.83 according to my RK2...
 
Rating - 100%
204   0   0
thats pritty much how i have my effluent cup as well.. as for the drip rate i now have it at about 1 bubble every 3 seconds for now.... will up in in a couple of days to one bubble every 2 seconds and then 1 every second. but slow is better and i messed up i also have a pritty high flow rate going through it becuase im trying to lower the alk level. im following this way http://www.melevsreef.com/calcium_reactor.html

tell me if this is the wrong way to do it. right now my ph in the reactor is 7.83 according to my RK2...


I had the exact same problem happen to me that past few weeks

reducing the flow and playing around with the right PH level in your reactor is the way to go.
 

Deep Dive Coral

Advanced Reefer
Rating - 100%
46   0   0
well how would i know the difference between your setup and mine.... i use a geo recirculation reactor..... if i test the effluent will it very high in alk??? see here is where i think i went wrong..... either too much flow or not enough flow? right now i have to figure out what is the right flow....
 

aaron23

!THE ULTIMATE REEFER!
Location
NY
Rating - 98.3%
234   4   0
by reading your explanation at the start my question to you is, Do you have a valve regulating the output of effluent (the reactor fluid to the tank to control how much gets dosed in your tank)?
 

Sponsor Reefs

We're a FREE website, and we exist because of hobbyists like YOU who help us run this community.

Click here to sponsor $10:


Top